Speck pumpen BADU Genio Traduction Des Instructions D'utilisation D'origine page 123

The following selection options are available for the Operating
mode button:
• Off: Function is switched off.
• On: Function regulates permanently.
• Timer: Function the same as for permanently on but only
during the period of time set in the switching times.
• 10 s On: The relay switches on for 10 s for testing and then
switches off.
If level regulation is "active", the regulation can switch relay 1 to
"Supply" on dropping below the water level.
A time can be set in the timer in which the active state is limited
depending on the day and time. Up to 5 different level times can
be defined.
09|2019
Operation
EN 53