Remote Controller - dji AGRAS T20 Guide De Démarrage Rapide

Remote Controller

The Smart Controller 2.0 uses the DJI
and supports Wi-Fi and Bluetooth functions. The remote controller is equipped with a 5.5-inch bright, dedicated screen that has
the DJI Agras app built in, significantly improving smoothness and stability. When the RTK dongle is connected to the remote
controller, users can plan operations to centimeter-level precision. The Multi-Aircraft Control mode* of the remote controller can be
used to coordinate the operation of up to three aircraft at the same time, enabling pilots to work efficiently. Both the built-in battery
and external battery can be used to supply power to the remote controller. The total working time is up to 4 hours, which fully
meets the requirements for long and high-intensity operations.
1
2 4
3
5
6
12
13
14
1. Antennas
2. Back Button / Function Button
3. Control Sticks
4. RTH Button
5. Button C3 (customizable)
6. Flight Mode Switch
7. Status LED
8. Battery Level LEDs
9. 5D Button (customizable)
The figure below shows the function that each control stick movement performs, using Mode 2 as an example. In Mode 2,
the left stick controls the aircraft's altitude and heading, while the right stick controls its forward, backward, and left and
right movements.
Left Stick
Turn Left
* The remote controller is able to reach its maximum transmission distance (FCC / NCC: 5 km (3.11 mi); CE / KCC / MIC / SRRC:
3 km (1.86 mi)) in an open area with no electromagnetic interference, and at an altitude of approximately 2.5 m (8.2 ft).
Make sure to comply with local laws and regulations when using Multi-Aircraft Control mode.
TM OcuSync 2.0 transmission system, has a maximum control distance of up to 5 km*,
7 8
10
11
9
15
16
10. Power Button
11. Confirm Button
12. Touch Screen
13. USB-C Charging Port
14. Dongle Compartment Cover
15. Spray Rate Dial
16. Spray Button
17. HDMI Port
18. microSD Card Slot
Up
Down
Turn Right
21
17 18 19
20
Right Stick
Left
22
24 23
25
27
26
19. USB-A Port
20. FPV / Map Switch Button
21. Work Efficiency Dial
22. Air Outlet
23. Button C1 (customizable)
24. Button C2 (customizable)
25. Battery Cover
26. Battery Cover Release Button
27. Handle
Forward
Backward
Right
3