Table des Matières
Publicité
Remote Controller
The remote controller features DJI's long-range transmission technology OcuSync that is capable of
controlling the aircraft and the gimbal cameras at a maximum transmission range of 4.3 mi (7 km)*.
Connect an iPad to the remote controller via the USB port to use the DJI GS Pro app to plan and perform
missions. Export the captured images for analysis and create multispectral maps. The remote controller has
a rechargeable LiPo battery with a maximum battery life of approximately 6 hours*.
1. Power Button
2. Return to Home (RTH)
Button
3. Control Sticks
4. Status LED
5. Battery Level LEDs
6. Power Port
7. Mobile Device Holder
8. Small Device
Positioning Tabs
(for mobile phones)
9. Antennas
10. Handle Bar
Folded
The figure below shows the function that each control stick movement performs, using Mode 2 as an
example. The left stick controls the aircraft's altitude and heading, while the right stick controls its forward,
backward, left and right movements. The gimbal dial controls the camera's tilt.
Left Stick
Down
Turn Left
* The remote controller is able to reach its maximum transmission distance (FCC/NCC) in a wide open area with no
Electro-Magnetic Interference, and at an altitude of about 400 ft (120 m).
The maximum runtime is tested under laboratory environment, only for your reference.
Pictures will only be taken when the shutter button is fully pressed.
7
8
3
1
4
2
5
6
Right Stick
Up
Turn Right
11. Gimbal Dial
12. Reserved Dial
13. Video Recording Button
14. Flight Mode Switch
15. Shutter Button*
16. Reserved Blank Button
9
17. C1 and C2 Buttons
(customizable)
18. USB Port (for mobile
device connection)
19. Micro USB Port
10
17
19
11
13
14
Forward
Backward
Left
Right
17
18
12
15 16
Gimbal Dial
3
Publicité
Table des Matières
