Cleaning - Welch Allyn 49500 Manuel D'utilisation

CLEANING

NOTE: Welch Allyn Light Source should not be sterilized or immersed.
1. Prior to cleaning, turn power off and disconnect the power cord from both the
wall outlet and the Welch Allyn Light Source.
2. The external surfaces may be cleaned by wiping with a cloth dampened with mild
soap and water or by using the following cleaning/disinfecting solutions. DO NOT
IMMERSE.
• Cidex, CidexPlus
• 70% isopropyl alcohol
• 10% mild bleach solution
• Metracide
• 10% Wescodyne
• Banicide
• Wavecide-01
3. The power cord may be wiped clean using the same cleaning/disinfecting
solutions listed above. Wipe dry with a clean cloth. Care must be taken not to
get the plug prongs wet. DO NOT IMMERSE.
4. Do not plug the unit into a wall outlet until it is thoroughly dry.
1-8