Samoa 560 230 Manuel D'utilisation page 27

• Electronic digital meter featuring a turbine
measurement system, designed for precise
measuring of low viscosity fluids.
• Only use the unit for the purposes for which it
is intended.
• This unit has not been approved for use in
commercial transactions.
• Do not alter or modify the unit.
• Do not exceed the maximum unit working
pressure. See the technical specifications.
• Use the unit with fluids and solutions which
are compatible with the moist parts of the
unit. See the relevant section of the technical
specifications.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
ELECTRONIC TURBINE METER
Parts and technical service guide
Introduction
• Observe the manufacturer's safety warnings
for the fluids used.
ATTENTION
YOU MUST AVOID ANY CONTACT BETWEEN THE
ELECTRICAL POWER SUPPLY AND THE FLUID
THAT NEEDS TO BE FILTERED
BEFORE ANY CHECKS OR MAINTENANCE WORK ARE
,
CARRIED OUT DISCONNECT THE POWER SOURCE
Part No.:
366760 366761
.
R. 01/16 836 828
.
1