Engine; Flushing Device; Install Cowling - Yamaha F75 Manuel De L'utilisateur

4. Check that the oil level on the oil dipstick
is between the upper and lower marks.
Consult your Yamaha dealer if the oil lev-
el is not at the proper level or if it appears
milky or dirty.
1. Lower mark
2. Oil dipstick
3. Upper mark
EMU27154

Engine

 Check the engine and engine mounting.
 Look for loose or damaged fasteners.
 Check the propeller for damage.
 Check for engine oil leaks.
EMU36494

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
garden hose connector is not properly
connected, cooling water can leak out and
the engine can overheat during operation.
[ECM01802]
1
1. Fitting
2. Garden hose connector
3. Flushing device
EMU36965

Install cowling

1. Be sure that all cowling lock levers are
released.
2. Be sure that the rubber seal is seated all
the way around the top cowling.
3. Place the top cowling on the bottom
cowling.
4. Check to be sure the rubber seal is seat-
ed correctly between the top cowling
and the bottom cowling.
5. Move the cowling lock levers to lock the
top cowling as shown. NOTICE: If the
top cowling is not installed correctly,
water spray under the top cowling can
damage the engine, or the top cowling
can blow off at high speeds.
1. Cowling lock lever
Operation
2
3
ZMU06166
[ECM01992]
1
ZMU08514
51