3-11
EMU00209
Controls
G
Check throttle, shift, and steering for
proper operation before starting the
engine.
G
The controls should work smoothly, with-
out binding or unusual free play.
G
Look for loose or damaged connections.
G
Check operation of the starter and stop
switches when the outboard motor is in
the water.
EMU00210
Engine
G
Check the engine and engine mounting.
G
Look for loose or damaged fasteners.
G
Check the propeller for damage.
EMU01733
CHECKING THE ENGINE OIL LEVEL
1) Put the outboard motor in an upright
position (not tilted).
2) Check the oil level using the oil level
check window to be sure the level falls
between the upper and lower marks. Fill
with oil if it is below the lower mark, or
drain to the specified level if it is above
the upper mark.
1 Oil level check window
2 Lower level mark
3 Upper level mark
GB