Treatment Of Submerged Motor - Yamaha F75 Manuel De L'utilisateur

6. Pull the rope slowly until resistance is
felt.
7. Remove the rope from the flywheel tem-
porarily.
8. Rewind the rope around the flywheel ap-
proximately 3/4 of a turn clockwise.
9. Give a strong pull straight out to crank
and start the engine. Repeat if neces-
sary. WARNING! Do not install the top
cowling when engine is running.
[EWM00622]
EMU33502

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
[ECM00402]
ZMU04272
Trouble Recovery
97