Installing Under Windows 3.1; Installing The Printer Software For Network Printing - HP C2688A Mode D'emploi

If the installation program does not run automatically, click Start,
select Run, and at the command line box, type the letter of your
computer's CD-ROM drive followed by: \SETUP (for example,
type D:\SETUP).
3. Click Install Printer Driver from the Starter CD menu.
4. Select the language of the printer software that you want to install
and click OK.
5. Click Next and then click Accept to accept the terms of the license
agreement.
6. Select Connected directly to this computer. Follow the instructions that
appear on the screen to complete the printer driver installation.

Installing under Windows 3.1

To install the printer software under Windows 3.1, you must have an:
 HP Business Inkjet 2250 printer, or
 HP Business Inkjet 2200 printer with the HP Postscript/PCL5 Kit
upgrade (C5935A).
1. Start Microsoft Windows and make sure no other Windows
applications are running.
2. Insert the Starter CD into the CD-ROM drive.
3. From the Program Manager select File, Run.
4. At the command line box, type the letter of your CD-ROM drive
followed by: \WIN31\X\<language>\OEMSETUP.INF where X is
the driver you wish to install (PS or PCL5) and <language> is your
language preference. For example, type
D:\WIN31\PS\ENU\OEMSETUP.INF to install the Postscript driver
in English. For a list of languages and their abbreviations, see
page 4-4.
5. Follow the instructions that appear on the screen to complete the
driver installation.

Installing the Printer Software for Network Printing

Before installing the printer software, make sure the HP JetDirect EIO
print server card is installed in your printer and connected to the
network.
Note: The HP Business Inkjet 2250TN comes with an HP JetDirect EIO print server
card preinstalled.
To Install the Printer Driver
1. Start Microsoft Windows and make sure no other Windows
applications are running.
3-2