HP C2688A Mode D'emploi page 22

Message Explanation
REPLACE The printer detects a
[COLOR] faulty ink printhead.
PRINTHEAD
[COLOR] The printer cannot
PRINTHEAD detect the ink printhead
MISSING because it is missing,
improperly installed, or
defective.
BAD INK The printer detects a
CARTRIDGE OR faulty ink cartridge or
PRINTHEAD printhead.
LOAD [TRAY] Printer requires media
WITH [MEDIA of a specific type and
TYPE] [MEDIA size to be loaded in
SIZE] specified paper tray.
PRINTED PAGE IS Printer is letting the
DRYING... PRESS current page dry.
RESUME TO
CONTINUE
PERSONALITY The printer cannot
CARD NOT detect the card because
RECOGNIZED it is missing, improperly
installed, or defective.
RESET JETDIRECT Prompts user to reset the
CARD internal parameters of
the JetDirect card.
CLOSE ALL The printer will not print
COVERS until all access covers
are properly closed.
OUT OF The printer is out of
MEMORY memory and cannot
print the current job.
5-6
Solution
Reinstall the faulty ink
printhead and try to print.
Make sure the shipping tape
has been removed. If the
error persists, remove the
printhead and use a dry, lint-
free, soft cloth to gently clean
any ink off the contact pads.
Reinstall the printhead and try
to print. If the error persists,
replace the printhead.
Open the ink printhead door
and check if the printhead is
missing, improperly installed,
or the wrong printhead. If
none of these solutions work,
replace the printhead. If the
error persists, call HP.
Follow the instructions in the
printer message.
Follow the instructions in the
printer message.
Remove the wet page and
press the Resume button to
continue printing.
Reinstall the personality card
or replace it. If the error
message persists, call HP.
From the RESET Menu, press
the Value Button to select EIO
RESET.
Follow the instructions in the
printer message.
Cancel the current print job,
and add additional memory,
or reduce the complexity of
the document you are trying
to print.