13.
Left Trigger Switch
When the left side trigger connector from the remote cable is connected to the front of the feeder, turn this switch on to
activate the left side feeder. Turn off switch to deactivate the left side feeder.
14.
Right Trigger Switch
When the right side trigger connector from the remote cable is connected to the front of the feeder, turn this switch on to
activate the right side feeder. Turn off switch to deactivate the right side feeder.
4-2. Left Side Active Setup Example
1
2
.
Only illuminated controls can be changed
or adjusted.
OM-239 982 Page 18
3
1
Left Side Controls Active
2
MIG Process Selected
4
3
Trigger Hold Off
4
Memory Location 1 Active
Ref. 245 257-A