cecotec IRONMIX Manuel D'instructions page 20

ENGLISH
the heating indicator light will start blinking.
6. The appliance will beep for 5 seconds once it has finished.
7. Turn the appliance off and remove the lid.
8. Take the food out of the jar.
Caution:
1. Do not touch the metallic parts of the blades.
2. Never heat up the jar while empty!
3. High temperature protection: when the temperature in the jar exceeds 60 ºC, the speed is
limited (speeds 1-5).
· Speed and temperature
Follow the steps below when you wish to combine both functions:
1. Install the blade and put the food into the jar.
2. Then, close the lid and install the jar onto the main body.
3. Rotate the lock of the lid to locked position and place the measuring cup on the lid.
4. Plug the appliance and turn on the power switch.
5. Set the time you need (less than 1 hour) and the timer will start a countdown (...5, 4, 3, 2,
1). If you skip the timer setting, the timer will count upwards (1, 2, 3, 4, 5...). The temperature
range is (20 ºC-120 ºC); if no temperature is selected, the appliance will not heat. Then, select
the desired speed (1-12). The appliance will start working and the heating indicator light will
blink. (High temperature protection: when the temperature in the jar exceeds 60 ºC, the speed
is limited to 1-5). The appliance will maintain the selected temperature.
6. The appliance will beep for 5 seconds once it has finished. The LCD screen will blink until
manually stopped by rotating the speed to "0" or turning the appliance off.
7. Turn the appliance off and remove the lid.
8. Take the food out of the jar.
Caution:
1. Do not touch the metallic parts of the jar or blade when hot!
2. Hold the handle of the jar only to move it!
3. Never heat up the jar while empty!
4. Do not heat more than 500 ml of milk at once!
5. High temperature protection: when the temperature in the jar exceeds 60 ºC,
the speed is limited (speeds 1-5).
20 IRONMIX