SOLAC BA5627 Mode D'emploi page 9

ENGLIsH
DEsCRIPTION
A Speed control
B Buttons
B1 on
B2 turbo
C Driving motor
D Stick-blender accessory
E Measuring cup
F Adapter fitting (*)
F1 Globlet adapter fitting
F2 Whisk adapter fitting
G Whisk accessory (*)
H Chopping accessory (*)
(*) Only available in the model MIXTER 800
CHEF
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
sAFETY ADVICE AND WARNINGs
Read these instructions care-
•
fully before switching on the
appliance and keep them for
future reference. Failure to fo-
llow and observe these instruc-
tions may result in an accident.
Failure to follow and observe
these instructions may result in
an accident.
Clean all the parts of the pro-
•
duct that will be in contact with
food, as indicated in the clea-
ning section, before use.
This appliance must not be
•
used by children. - Keep the
appliance and its cable out of
reach of children.
This appliance can be used by
•
people unused to its handling,
disabled people if they have
been given supervision or ins-
truction concerning use of the
appliance in a safe way and
understand the hazards invol-
ved.
This appliance is not a toy.
•
Children should be supervised
to ensure that they do not play
with the appliance.
The blades are sharp and there
•
is a risk of being cut. Proceed
with caution and avoid direct
contact with their edges.
Be especially careful when
•
handling the blades during
operations of assembly and
dismantling, emptying the go-
blet and cleaning.
Always disconnect the applian-
•
ce from the mains if left unat-
tended and before assembly,
dismantling or cleaning.
Disconnect the appliance and
•
unplug the mains before chan-
ging the accessories or nearby
moving parts that move during
use.
CAUTION: In order to avoid a
•
hazard due to inadvertent re-
setting of the thermal protec-
tor, this appliance must not be
supplied through an external
switching device, such as a ti-
mer, or connected to a circuit
that is regularly switched on
EN