Returning For Service - DeFelsko PosiTest AT-M Mode D'emploi

Masquer les pouces Voir aussi pour PosiTest AT-M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before returning the instrument for service, install new or newly
recharged AAA batteries in the proper alignment as shown within
battery compartment. Re-attempt the pull-off test (pg. 3).
IMPORTANT: If these steps do not resolve the issue and the
instrument must be returned for service, please follow the
instructions provided at www.defelsko.com/service.
Limited Warranty, Sole Remedy
DeFelsko's sole warranty, remedy, and liability are the express
limited warranty, remedy, and limited liability that are set forth on
its website: www.defelsko.com/terms
© 2021 DeFelsko Corporation USA All Rights Reserved
This manual is copyrighted with all rights reserved and may not be
reproduced or transmitted, in whole or part, by any means, without written
permission from DeFelsko Corporation.
DeFelsko, PosiTest, PosiTector, and PosiSoft are trademarks of DeFelsko
Corporation registered in the U.S. and in other countries. Other brand or
product names are trademarks or registered trademarks of their respective
holders.
Every effort has been made to ensure that the information in this manual
is accurate. DeFelsko is not responsible for printing or clerical errors.

Returning for Service

and Limited Liability
www.defelsko.com

Publicité

Table des Matières
loading

Table des Matières