Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Actuator Handle
Hose
Actuator
Assembly
Quick Coupling
1. Ensure the pressure relief valve is
completely open (turn counter clockwise).
2. Push the actuator handle completely down into the actuator
assembly. Place the actuator over the dolly head and attach
the quick coupling to the dolly by reaching through the holes
in the actuator and lifting the coupling. Release the quick
coupling when the dolly head is completely engaged.
3. Close the pressure relief valve on the
pump completely (turn clockwise).
As required, adjust the dolly size by pressing the
the pressure units by pressing the
maintain these settings even after the
NOTE:
The 50 x 50 mm square dolly size is used for testing tile
adhesion and should NOT be used when testing with 50 mm round
dollies.
Display
USB Port
Battery Compartment
(2 AAA batteries)
4
Pump Handle
OPEN
CLOSE
button. The instrument will
button is pressed.
Pump
button. Select
Publicité
Table des Matières
