Kärcher MIC 70 Mode D'emploi page 58

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87
6.10.2Centre operating console for MIC 70
PTO on/off
1
Position 1: Switch on the PTO
Press the black knob and pull the button
PTO on/off
Position 0: Switch off the PTO
Press the button downwards.
Selector switch for hydraulic PTO
2
Tempomat
3
Differential lock
4
Electrical PTO, front
5
Electrical PTO, rear
6
Switchover for double-acting control hydraulics AUX
7
"rear/attachment frame with tipping function"
Main switch, floating position
8
Dump valve (quick-lowering for AUX rear)
9
Attachment release switch (optional)
10
Note
This switch is responsible both for vibration dampening
and for attachment release (both options at the same time
does not work)
Locking enabling for shovel or fork in the optional front
11
loader attachment
Switch for bypassing floating position (PTO usable with-
12
out floating position)
ATTENTION
Only use with attachments that need this function!
Hazard warning switch
13
Potentiometer - engine speed
14
58
Selector switch for hydraulic PTO
Hydraulic PTO (100 l/min, front) activated
1
Hydraulic PTO (50 l/min, front) activated
2
Hydraulic PTO (50 l/min, front) and (50 l/min, rear) acti-
3
vated
Hydraulic PTO (50 l/min, rear) activated
4
Hydraulic PTO (100 l/min, rear) activated
5
The selector switch is used to activate the relevant con-
nection for the front and rear hydraulic PTO.
6.10.3Rear operating console for MIC 70
Rotary knob for front power lift lowering speed
1
Rotary knob for attachment release
2
Ignition lock
3
Additional socket-outlet, 12 V
4
Engine off
1
Ignition on
2
English
Ignition lock

Publicité

Table des Matières
loading

Table des Matières