Connecting The Phone - Swissvoice Aeris 146 Mode D'emploi

Connecting the phone

• Before you can start using your telephone you must plug in the telephone connec-
tor cable and the mains cable.
• The NiMH batteries are pre-installed in the handset. To activate the handset you
have to remove the red tagged protective plastic tape.
Pull out the plastic tape, your handset is ready to operate.
• To replace the batteries first remove the direct dial paper foil, remove the security
screw and pull out the battery cover. Insert the batteries in the battery compartment
and make sure to respect the polarity. Put the battery cover back and security
screw in place, as well as the direct dial paper foil.
• To charge the batteries, insert the handset in the base station. The animated bat-
tery symbol on the handset signals the charging procedure. The batteries will take
around 15 hours to fully charge (initial charge).
Set language
Default setting on delivery: English.
Press Menu, select HS Settings and press Select.
•
Select Language and press Select.
•
• Choose the desired language from the list, confirm with Save.
The display texts are now displayed in the selected language.
Set date and time
Press Menu, select HS Settings and press Select.
•
Select Date & Time and press Select.
•
• Scroll through the list using the navigation keys.
• Select date and time format. Press Save.
• Enter date and time and press Save.
• Press the End call key to return to standby mode.
Aeris 146
Aeris 146
21