Outgoing Message; Call Screening; Operating The Answer Machine On The Base Station - Swissvoice Avena 248TE Mode D'emploi

Avena 248TE

Outgoing message

You can select 2 operating modes:
• Answer & record: Callers can leave a message.
• Answer only: Callers cannot leave a message.
Your answer machine comes with two standard pre-recorded outgoing messages. You
can replace the standard outgoing message with a personal one (max. 1 minute long).
Press Menu, select Answer Machine and press OK.
•
Select Outgoing message and press OK.
•
Select Record message and press OK.
•
Select Answer&&Record or Answer Only and press OK.
•
• Speak your outgoing message into the handset microphone.
• Press the softkey under Save to end recording. The recorded outgoing message is
played back.

Call Screening

Incoming messages are played back over the base station loudspeaker. You can
adjust the volume by pressing the keys
handset to listen in. Press the Talk key to answer an incoming call.

Operating the answer machine on the base station

If you have new messages, the message counter is flashing. The messages are played
back beginning with the most recent.
• Press to start playback.
• During playback the following options are available:
Key Function
Repeat message/return to previous message
Skip to next message
End playback
Delete message during playback
Adjust volume
Delete all old messages
Impossible during playback. Press key
86
All manuals and user guides at all-guides.com
Vol + / -
. Press the left softkey Yes on the
twice to delete all old messages.
Avena 248TE