BATTERY INSTALLATION
The battery compartment is located on the back of the
remote control.
1.
Remove the battery compartment door by pressing in
on the tab and lifting it off.
2.
Insert two (2) AAA size batteries (not included) into
the battery compartment following the polarity
markings inside the battery compartment.
3.
Replace the battery compartment door.
Remote control transmitter
Control functions
Button description
1. On/standby
2. Play/pause
/Scan
3. Skip
up
/down
Tune+/-
4. Stop
/Enter
5. Folder/Pre Up-Down
6. Scan
7. Rec
8. Volume -/+
9.
10. Sleep/Timer
11. Play mode
12.
Eject
13. Function
14. Del/info
15. Preset EQ
16. Mute
17. Mem / Clk-adj
Press to power on / standby the system
In CD/USB mode: press to start playback/pause mode
Press to select previous/next tracks at CD/USB mode
Press to step up/down of radio frequency at tuner
mode
In CD/USB mode: press to stop the playback
In Tuner mode: select stereo/mono mode
In Tuner mode: press to select preset memory up/down
In USB mode: press to select folder up/down
In FM/DAB mode, press to search the station
Press to active encoding/mp3 file copy function
Press to adjust volume level up/ down
In encoding mode: press to active track separation
function
In power on mode: press to active sleep function
In standby mode: press and hold to enter timer set up
mode and press once to active/de-active timer function
In CD mode: press to active random/repeat function
CD Door open/close
Select the function between CD/Tuner/USB/SD/Aux
In USB mode: press to delete the file in the USB/SD memory
In MP3 playback mode: press to active ID3 function
In DAB/FM mode, press to see the broadcast information
Press to select difference EQ mode for enjoyment
Press to cut the sound temporarily
In standby mode: press & hold to adjust clock
In CD/USD/Tuner mode: press to preset memory
NR546 / English Instruction Manual
1