SOUNDMASTER NR546 Guide D'utilisation page 20

Important:
To make sure the turntable can play the record with different standard completely, a hole with "NO OPEN" PVC plate located at
the back of the unit (31) to adjust the screw inside the turntable.
When the turntable stop early and the auto-return, pls use a screw driver to turn the screw inside the hole about 45 degree in
clockwise direction, if the record still can not be played completely, stop play and re-turn the screw 45 degree in clockwise
direction again, till the turntable can be play the record completely and auto return.
When the turntable can not be stop and auto return but keep running after playing the record completely, pls use a screw driver
to turn the screw inside the hole about 45 degree in counter-clockwise direction, if the record still can not be played completely,
stop play and re-turn the screw 45 degree in counter-clockwise direction again, till the turntable can be play the record
completely and auto return.
Listing to Tape
General operation
Cassette playback:
Stop and ejection:
Fast forward:
Remark
- Make sure the direction is correct when inserting the tape into the system.
- There is some searching noise can be heard and the system cannot perform normal playback function during fast forward
mode.
This is recommended to take out the cassette tape from the system every times after listening and don't leave the cassette
-
tape inside the system when not under playback mode.
Bluetooth connecting and Playback
Press Function button to select (5) to "Bluetooth" mode.
1.
2. The LCD display (6) will flashing with Bluetooth icon, it means the BT is in non-connection/searching mode.
Switch on the Bluetooth feature of your BT device (such as mobile phone) and select "NR546" BT equipment to connecting.
3.
4. Once the connecting was finish and connect successfully, the Bluetooth icon will change to light up on LCD display (6).
5. Start to playback your BT device and enjoy the music by the main unit.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, iPod, etc. To this system via a
cord with 3.5mm diameter jack plugs (not supplied). Connect one end of this cord to the headphone jack of the external device
and the other end to the aux-in jack (2) at the side of the unit. Then press Function button (5) to "AUX" mode. Start to playback
your external device to enjoy your music.
More features
A. Sleep function
1. Press "Sleep" button (18) "SLP-120" will be shown on the LCD display (6).
2. Keep pressing the button to adjust the sleep timer in the order of 120>90> 60 > 45 >....15 minutes respectively and sleep
icon " " will indicate on LCD.
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press "Sleep" button until "SLP-off' displayed and the "
8
The system will start the playback automatically after inserting of cassette tape
Press the "Tape forward/eject" button completely inwards and the cassette tape will be ejected
though the cassette door cover. The "Tape forward/eject" button will keeping at lowest height
position.
Press the "Tape forward/eject" button half inwards during Playback mode, the tape winding
forward direction. The "Tape forward/eject" button will keep at middle height position.
Slightly press the "Tape forward/eject" button again to resume normal playback. The "Tape
forward/eject" button will resume to the highest position.
PLAY FAST
FORWARD
NR546 / English Instruction Manual
EJECT
" indicator disappear on LCD display.