Using The "Descaling" Programme - Melitta VARIANZA CSP Mode D'emploi

Care and maintenance
CAUTION
Contact with fully automatic co ee maker cleaning agent may lead to
eye and skin irritation.
Observe the processing instructions on the packaging of the fully auto-
ƒ
matic co ee maker cleaning agent.
ATTENTION
The use of unsuitable fully automatic co ee maker cleaning agent can
damage the appliance.
Only use Melitta® PERFECT CLEAN cleaning tabs for fully automatic
ƒ
co ee makers.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Cleaning co ee system menu.
3. Select Start using the arrow buttons and con rm with "menu/ok".
4. Follow the further instructions on the display up to the end of the clean-
ing programme.
» The ready symbol appears on the display.
9.7

Using the "Descaling" programme

The descaling programme is used to remove limescale deposits in the inte-
rior of the appliance with fully automatic co ee maker descaling agents.
To avoid damage to the appliance, we recommend carrying out the descal-
ing programme every 3 months or as requested by the appliance.
The descaling programme takes approximately 25 minutes and should not
be interrupted.
CAUTION
Contact with fully automatic co ee maker descaling agent may lead to
eye and skin irritation.
Observe the processing instructions on the packaging of the fully auto-
ƒ
matic co ee maker descaling agent.
90