Melitta VARIANZA CSP Mode D'emploi page 72

Using the My Bean Select® function
MY BEAN SELECT
Fill in single portion
Fig. 15: Filling co ee beans for the My Bean Select® function
1. Remove the measuring spoon (2) from the bean chute (36).
» The My Bean Select message appears on the display with the requests
Fill with single portion of beans, put back in the spoon.
2. Use the measuring spoon to ll a single portion of co ee beans into the
bean chute (36).
3. Place the measuring spoon back onto the bean chute.
» The My Bean Select ready symbol with the Select beverage request
appears on the display.
4. Prepare any co ee beverage.
Information
The measuring spoon is intended to help in lling the correct amount of
co ee beans into the bean chute.
A full measuring spoon contains approx. 10 to 11 g of co ee beans.
ƒ
Depending on the desired co ee strength, fewer co ee beans can also
be lled.
If there are less than approx. 8 g co ee beans in the bean chute, the My
ƒ
Bean Select® function is not activated. The My Bean Select ready symbol
does not appear on the display. The next time a co ee is dispensed, the
co ee beans from the bean chute are mixed with the co ee beans from
the bean container.
72
Mount spoon