Melitta VARIANZA CSP Mode D'emploi page 61

9
Fig. 5: ON/OFF button
Requirement: The appliance has been installed and connected.
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
» The welcome display appears on the appliance.
» The request to carry out the setup appears: Please set up the machine.
3. Con rm with "menu/ok".
» The Language menu appears.
4. Select your language with the arrow buttons. Con rm with
"menu/ok".
» The Water hardness menu appears.
5. Select the determined water hardness range with the arrow buttons or
con rm the default value with "menu/ok".
» The request Please re ll and insert water tank appears.
6. Remove the water tank. Rinse out the water tank with clean water. Fill
the water tank with fresh water and insert it.
» The appliance heats up and performs automatic rinsing.
» The ready symbol appears on the display.
7. Fill co ee beans into the bean container. To do this, read section 4.4
Filling co ee beans into the bean container on page 65.
» If required, a water lter can now be inserted (see section 9.9 Using a
water lter on page 92).
First steps
61