Preparing Beverages; Preparing Espresso And Café Crème - Melitta VARIANZA CSP Mode D'emploi

6

Preparing beverages

There are two options for preparing beverages:
Standard dispensing as described below,
Selection and preparation of a recipe (see section 6.6 Preparing further
beverage specialities with recipes on page 75).
Information
A single co ee beverage can be prepared from an alternative type of
co ee (see section 5 Using the My Bean Select® function on page 71).
The default settings for standard dispensing or for a recipe can be
permanently changed (see section 7.1 Changing default settings on
page 79).
Please note:
There should always be su cient water in the water tank. If the ll level
is too low, the appliance requests you to re ll it.
There should always also be su cient co ee beans in the bean con-
tainer. If there are no longer any co ee beans present, the appliance
stops the preparation of a co ee beverage.
The appliance does not detect the level of milk.
The vessels for the beverages should be su ciently large (see table
Factory settings on page 97).
6.1 Preparing Espresso and Café Crème
Requirement: The ready symbol appears on the display.
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café Crème" button.
» The grinding process and beverage dispensing start.
» Beverage dispensing ends automatically.
3. Remove the vessel.
» The ready symbol appears on the display.
Preparing beverages
73