18
Fig. 10: Drip tray, coffee grounds container
and float
1. Pull the drip tray (10) forwards out of
the appliance.
2. Remove the coffee grounds container
(9) and empty it.
3. Empty the drip tray.
4. Insert the coffee grounds container.
5. Push the drip tray into the appliance up
to the stop.
Information
The appliance requests you to empty the
drip tray and the coffee grounds container
after a defined number of beverages have
been dispensed. If the containers are emp-
tied while the appliance is switched off, it
does not register this process. Therefore,
it is possible that you are requested to
empty the containers although the drip
tray and the coffee grounds container are
not yet full.
5
Preparing beverages
There are three options for preparing
beverages:
ū Standard dispensing with direct keys
and beverage preparation with recipes
as described below
Mel_009_CI_Touch_20_de--kr_druck.indb 39
9
10
Preparing beverages
ū Preparation with modified beverage
settings (see chapter 6, page 41)
ū Use of personal settings with the
My Coffee function (see section 7,
page 42).
Standard dispensing is described in this
section.
Please note:
ū The storage containers should contain
sufficient amounts of coffee and water.
If the filling level is too low, the appli-
ance requests you to refill it.
ū The appliance does not indicate a lack
of milk.
ū When selecting a beverage with milk,
connect the milk container or a com-
mercially available milk pack.
ū The vessels for the beverages should be
sufficiently large.
ū For beverage preparation, the display
must show the ready for use display.
ū Beverage dispensing is ended automat-
ically.
ū After beverage preparation with milk,
the appliance automatically outputs a
prompt for the Easy Cleaning pro-
gramme.
5.1 Preparing espresso and
café crème
1. Place a vessel beneath the outlet.
2. Press the "Espresso" or "Café Crème"
button.
»
Beverage dispensing is carried out
and ends automatically.
3. Remove the vessel.
39
14.09.2018 13:51:39