Adjusting The Balance - Clarion DXZ588RUSB Mode D'emploi

01_DXZ588RUSB_EN.book 16 ページ ２００７年１１月２７日 火曜日 午後６時５分
Basic Operations

Adjusting the balance

2-1. Select "BALANCE".
3-1. Press the [UP] button to emphasize the
sound from the right speaker, press the
[DN] button to emphasize the sound from
the left speaker.
∗ The factory default setting is "CENTER".
(Adjustment range: L12 to R12)
Adjusting the fader
2-1. Select "FADER".
3-1. Press the [UP] button to emphasize the
sound from the front speaker, press the
[DN] button to emphasize the sound from
the rear speaker.
∗ The factory default setting is "CENTER".
(Adjustment range: R12 to F12)
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
1. Press and hold the [
or longer to turn on the MAGNA BASS
EXTEND effect. "M-B EX" lights in the
display.
2. Press and hold the [
or longer to turn off the MAGNA BASS
EXTEND effect. "M-B EX" goes off from the
display.
∗ The adjustment can only be performed when
the DZE is set to "DZE OFF".
∗ The factory default setting is off.
16
DXZ588RUSB
] button for 1 second
] button for 1 second
Mute
Use this function to turn off the sound
immediately.
1. Press the [ ] button.
The sound turns off and "MUTE" blinks in the
display.
2. Press the [ ] button again to cancel the
mute mode.
CT (Clock Time) function
The CT function receives CT data sent from an
Radio Data System station and displays the
time.
∗ If a CT data is not being received, "CT– –:– –"
appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.