Clarion DXZ588RUSB Mode D'emploi page 36

01_DXZ588RUSB_EN.book 36 ページ ２００７年１１月２７日 火曜日 午後６時５分
Bluetooth BB Operations
MIC GAIN
MIC gain can be set by each paired mobile
phone device. Each registered device has
unique MIC gain setting.
2-1. Select "MIC GAIN".
3-1. Push the [UP] or [DN] button upward or
downward to change the MIC gain setting.
RING VOL
This option is used to change the ringing
volume.
2-1. Select "RING VOL".
3-1. Push the [UP] or [DN] button upward or
downward to change the ringing volume.
AUTO ANSWER
This is a setting to determine whether any
incoming call will be automatically or manually
answered.
∗ The factory default setting is "ON".
2-1. Select "AUTO ANS".
3-1. Push the [UP] or [DN] button upward or
downward to select "ON" or "OFF".
ON: Any incoming call is automatically
answered in 4 seconds.
OFF: User needs to manually answer the
call.
REFUSE
This function allows all incoming calls to be
refused.
∗ The factory default setting is "OFF".
2-1. Select "REFUSE".
3-1. Push the [UP] or [DN] button upward or
downward to select "ON" or "OFF".
ON: All incoming calls are automatically
refused.
OFF: Incoming call notification enabled.
AUTO CON
This function allows the Bluetooth BB to be
connected automatically with previously
connected device. Connection can be
established at any source mode.
∗ The factory default setting is "ON".
2-1. Select "AUTO CON".
3-1. Push the [UP] or [DN] button upward or
downward to select "ON" or "OFF".
ON: Automatic connection is enabled.
OFF: Automatic connection is disabled.
36
DXZ588RUSB
PIN CODE
This PIN code is used during pairing mode. A
maximum of 10 digits can be changed through
the car stereo.
∗ The factory default PIN code is "1234".
2-1. Select "PIN CODE".
3-1. Press the [ ] button
4-1. Press and hold the [MENU] button to clear
the old PIN code.
5-1. Push the [SEEK PANEL] leftward or
rightward to remove the cursor.
6-1. Push the [UP] or [DN] button upward or
downward to select the desired digits.
7-1. Press and hold the [
seconds or longer to store in memory.
ADDRESS
This will hold the unique Bluetooth BB address.
The address is 12 figures.
2-1. Select "ADDRESS".
The Bluetooth BB address 6 figures
appears in the display.
3-1. Push the [UP] or [DN] button upward or
downward to display.
VERSION
This will display the software version of the
Bluetooth BB.
2-1. Select "VERSION".
The Bluetooth BB version appears in the
display.
] button for 2