Message Display; Adjusting The Display Contrast - Clarion DXZ835MP Mode D'emploi

Operations Common to Each Mode
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed for CD, CD changer
and TV stations.
∗ The factory default setting is "Welcome to Clarion".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select "MSG
INPUT ".
3. Press the [ ] button.
4. Press the [a] or [d] button to move the
cursor.
5. Press the [D] button to select a character.
Each time you press the [D] button, the
character changes in the following orders:
Numbers ➜ Symbols ➜ Umlaut ➜ Capital
letters ➜ Numbers...
6. Turn the [ROTARY] knob clockwise or
counterclockwise to select the desired
character.
7. Repeat step 4 to 6 to enter up to 30
characters for message.
8. Press and hold the [
seconds or longer to store the message in
memory and cancel input message.

Message display

When the unit is powered on or off, a message
is displayed. The user can turn this message
display ON or OFF.
∗ The factory default setting is "ON".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select "MES-
SAGE".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the message display "ON"
or "OFF".
4. Press the [T] button to return to the previous
mode.
] button for 2
Setting the method for title scroll
Set how to scroll in CD-TEXT or MD/MP3/WMA.
∗ The factory default setting is "ON".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
"AUTO SCROLL".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select "ON" or "OFF".
G ON:
To scroll automatically.
G OFF:
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return to the previous
mode.
Dimmer level
1. Press the [T] button for 1 second or longer to
enter ADJ mode.
2. Press the [a] or [d] button to select the
"DIMMER LV".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust Dimmer level.
4. Press the [T] button to return to the previous
mode.
∗ Adjustment range is OFF to LV5.
∗ Factory default setting is LV3.

Adjusting the display contrast

You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is "8". (Adjustment level:1to
18)
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
"CONTRAST".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the contrast.
4. Press the [T] button to return to the previous
mode.
21
DXZ835MP