Cleaning The Unit - Clarion DB625MP Mode D'emploi

CAUTION
• If you experience problems during installation,
consult your dealer.
• If the unit fails to operate properly, press the Re-
set button. The unit returns to factory settings
when the Reset button is pressed. After you press
the Reset button. If the unit still fails to operate
properly after the Reset button has been pressed,
contact your local dealer for assistance.
• Characters in the LCD may become difficult to
read in temperatures below 41 ˚F (5 ˚C).
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what appears
on the display on the actual equipment, and
some of the illustrations on the display may rep-
resent something impossible in actual opera-
tion.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on the
lens in the CD player of the unit. Called lens fog-
ging, CDs may be impossible to play. In such a
situation, remove the disc and wait for the con-
densation to evaporate. If the unit still does not
operate normally after a while, consult your
dealer.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with
a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral cleaner,
then wipe neutral detergent off.
CAUTION
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the faceplate
with a hard cloth or using a volatile liquid such
as thinner or alcohol may scratch the surface or
erases characters.
Cleaning the CD Slot
As dust can accumulate in the CD slot, clean it
occasionally. Your CDs can get scratched if you
put them in a dusty CD slot.
9
DB625MP