Harness To Booster Mode: Removing The Harness And Buckle - Britax PIONEER Guide D'utilisation

Switching Between Modes
Fasten the chest clip.
6
* Push together until a click is
heard.
Fasten the harness buckle.
7
Pull the adjuster strap to
8
tighten the harness.
* Pull the harness adjuster away
from the child seat (parallel to
the ground) to tighten.

Harness to Booster Mode: Removing the Harness and Buckle

Loosen the harness
1
completely.
a Press release lever
b Pull both harness straps forward
Unhook the harness straps from
2
the yoke.
* Store the yoke in a secure
place in the base.
Pull the harness straps out of
3
the slots.
32
Pull seat cover forward.
4
Unhook the harness straps
5
from the hip anchors.
Unhook the elastic bands at
6
the back of the seat cover. Pull
the seat cover forward and
over the belly pad.
Turn and pull the buckle
7
retainer through the slot in the
child seat shell.
Switching Between Modes
33