Maintenance; Cleaning The Appliance - LG A90 Série Manuel Du Propriétaire

us_main.book.book Page 20 Tuesday, December 15, 2020 3:58 PM

20 MAINTENANCE

MAINTENANCE

Cleaning the Appliance

Before Cleaning the Appliance
To maintain the optimum suction power, the
cyclonic mesh filter, the exhaust filter and the pre-
filter should be cleaned regularly and washed
under running water at least once a month.
• Turn off the power before cleaning the
appliance.
• The frequency of cleaning varies depending on
the usage environment and usage time. In a
dusty environment, clean frequently.
WARNING
• Never wash the Nozzle, rotating brush or
product body with water. Water could reach the
motor and cause electric shock or fire.
• Do not allow foreign objects to enter the motor.
Doing so may cause electric shock, fire or
product damage.
• Do not insert fingers or sharp objects into the
motor. Doing so could cause product damage,
personal injury or electric shock.
CAUTION
• Do not apply force or allow impacts to the
cyclonic mesh filter. Doing so could deform the
filter, compromise product performance, or
cause the product to malfunction.
Removing Foreign Objects
In order to maintain product performance, be sure
to remove any foreign objects and dust from
inside the product body, extension pipe or air
inlets.
• Foreign materials inside the product can cause
the product to be noisy, have poor suction, or
shut down during operation.
• If the inside of the product body, extension pipe,
inlets, pre-filter, or fine dust filter is clogged with
foreign objects, the power will surge (alternating
from Hi to Lo power) a few times to alert you to
the blocked airflow. The appliance will then
automatically turn off to prevent damage.
Separate the battery from the product body and
remove the foreign objects before resuming use
of the appliance.
Cleaning the Dust Bin
Empty and clean the dust bin after every use.
• If the dust bin is completely full of dust or the
filter is clogged, the suction power may be
reduced.
1
Remove the battery from the product body
before cleaning the dust bin.
2
Press the dust bin cover release button
open the dust bin cover. Shake the dust bin to
empty it.
• Be careful as dust or foreign objects may
spill out when opening the dustbin. Empty
the dust bin into a wastebasket or where
dust and foreign objects can be easily
removed.
to
a