Unpacking Instructions - Sonnenkonig FRESCO 1000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2 Vantage
This air conditioner has been designed and manufactured to the highest standards of modern
engineering. Our product not only provides you with a remote control for easy and convenient
use of all functions but also has the following benefits:
Easily transported from room to room on easy glide castors.
No installation required - just plug into any household power outlet.
Powerful refrigerated air system instantly cool indoor areas whenever you want.
Dehumidified and filtered air cycle improves the ambient air effectively.
In addition to the remote control, the one touch electronic pad also provides easy manual
operation.
24 hour programmable timer that can be used in either air conditioning or dehumidifying
mode.
220-240 Volt / 50 Hz operation
1.8 meter cord with plug

3 Unpacking instructions

IMPORTANT: Wait before you use at least 12 hours after unpacking the equipment it!
1. Place the unit in the correct upright position before unpacking.
2. Cut the two packing straps.
3. Slide the carton upwards to release it from the base.
4. Grip the carry handles located on either side of the unit and carefully lift until it slides out
of the foam base.
5. Remove the adapter and take out the exhaust hose as schown in the image.
6. Attach the exhaust hose to the unit before operating the unit.
7. The hot air outlet is connected at the base of unit.
Contents:
- Air conditioner unit
- Remote control
- Batteries
69
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fresco 12001000016210000262

Table des Matières