BH LK500R Guide D'utilisation page 15

STEP 3
Assemble the Rear Stabilizer (C) and the Rear
Frame (B) with Truss Hex Screw (K05) and
Spring Washer (K06).
STEP 4
Connect the wiring from the
Right Handlebar (N), to the Rear
Frame (B), and then attach the
right handlebar to the rear frame
with Hex Screws (K07) and Spring
Washers (K08). Do the same for the
Left Handlebar (M). Finally, place
the Cup Holders (P) into there
respective casings on the handlebars.
B
N
P
M
15