Publicité
Les langues disponibles
Les langues disponibles
Use as designated
The verticutter is only suitable to be used around the house
and in the garden and must not be used for industrial
purposes. The appliance can only be used as designated.
Any other use is in conflict with its purpose.
Residual risks and protective measures
Direct electrical contact
Defective cable or plug can cause life-threatening
electric shock.
Have always any defective cables or plugs replaced by a
professional. Use the appliance only with connection with a
safety switch against stray current (RCD).
Indirect electrical contact
Injuries by conductive parts at exposed electrical or
defective construction elements.
The appliance must always be unplugged for servicing
purposes. To be used with a safety switch against stray
current (RCD) only.
Inadequate local lighting
Insufficient lighting represents a high safety risk.
Always ensure sufficient lighting when working with the
appliance.
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the "Marking" chapter.
Transport container disposal
The container protects the appliance against damage
during transport. Container materials are usually selected
so as not to harm the environment and dispose them in an
environment-friendly manner.
Returning the container back in the circulation saves raw
materials and reduces waste disposal costs.
Parts of the container (e.g. foils, styropore) can be
dangerous to children. Risk of suffocation!
Keep parts of the container out of reach of children and
dispose them as quickly as possible.
Operator requirements
The operator must carefully read and understand the
Operating Instructions before using the appliance.
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18
years of age that have been familiarised with its operation
and working. Young people between 16 and 18 years of
age can only work with the appliance under adult
supervision.
An exception includes youngsters operating the appliance
within their professional education to achieve necessary
skills under trainer's supervision.
Training
Using the appliance requires only corresponding instruction
by a professional or reading the Operating Instructions. No
special training necessary.
Transport and storing
•
The appliance must be cleaned thoroughly and kept out of
reach of unauthorised persons when stored for a longer
period of time.
•
Secure the appliance against turnover every time it is to be
transported.
Assembly/first start-up
Some parts have been dismantled for the verticutter supply to
make transport easier. Screws, wheels, plastic hand wheels
and cable clamps are in a plastic bag. The appliance can easily
be assembled by following these instructions:
Handle post assembly
•
Take the verticutter out of the package.
•
Insert the bottom post with the handle in holes on the
verticutter.
•
Now press the upper connecting post to the bottom
post and screw both parts together using star screws
(included in the supply) (pic. 4/A)
•
Insert the connecting cable pull relief in the upper part
of the post with handle.
(pic. 4/D,E)
•
Fix the cable from the 2-point safety switch to the
engine with the attached cable clamps sideways to
the upper parts of the post with handle.
Verticutter height calibration (GV 1100 P)
•
Adjust the verticutter height on the front wheel axis.
•
Pull the wheel axis on both sides and insert in
appropriate screening.
Verticutter height calibration (GV 1400 P)
•
Adjust the verticutter height by turning the working
width adjusting wheel (pic. 2/9).
•
Turn the adjusting wheel to the required position and
adjust the appropriate verticutter height.
Collection container assembly (GV 1400 P) (pic. 3)
•
Connect the cloth container with the metal frame and
fasten tightly with plastic container clamps on the
metal frame.
•
Open the rear cover and hang the collection
container on the holding rod on the cover using two
hooks (pic. 4/B/C).
•
To operate the appliance without the collection
container, fix the hook for operation without collection
container (pic. 3).
Connecting cable pull relief
•
To prevent accidental pull-out of the connecting cable
from the 2-point safety switch, please make sure the
connecting cable is correctly fastened to the cable
pull relief (pic. 4/D/E).
Verticutter start-up
•
Before aerating, make sure the knife or its connecting
elements are not damaged in any way. Replace any
damaged knife if necessary.
11
Publicité
