Publicité
Les langues disponibles
Les langues disponibles
TO ENSURE HIGH SAFETY LEVEL, PLEASE FOLLOW
CAREFULLY THE INSTRUCTIONS BELOW:
Caution: To be used with RCD (safety switch
against stray current) only!
CAUTION!
•
Keep the place of your work clean and tidy. Mess in
the place of work and on the work table increases the
risk of accidents and injuries.
•
Make sure the conditions you are working in are
appropriate. Do not use the electric tools and devices
in a moist and wet environment. Provide appropriate
lighting. Do not expose the electric tools to rain or high
air humidity levels. Do not switch the electric tools on
near flammable liquids or gases.
•
Do not let foreign persons get near the appliance.
Keep all visitors and bystanders, especially children
and ill or weak persons, in a safe distance from the
place of your work.
•
Ensure that tools are stored in a safe way. Put the
appliances you no longer use to a dry place, an
elevated position if possible, or lock them in order not
to be accessed by other persons.
•
Correct appliance should always be used for the
appropriate type of work. Do not use e.g. small
appliances or accessories for works that actually need
to be provided using bigger appliances. Use the
appliances exclusively for the designated purposes.
Do not overload the appliance!
•
Keep an eye out for the feeder cable. Do not pull the
cable. Do not use it for unplugging the appliance. Keep
the cable out of reach of heat sources, oil and sharp
edges.
•
Avoid unintentional switching-on. Before plugging,
make always sure the appliance is switched off using
the switch button.
•
Special extension cables to be used outdoors
only. For outdoor use, special extension cables
appropriate for this purpose and adequately identified
are needed.
•
Be concentrated at all times. Pay attention to what
you are doing. Use common sense when working. Do
not use the electric tools if you are tired.
•
Keep an eye out for damaged parts. Check the
appliance before using it. Are any parts damaged? If
there is any slight damage, consider seriously whether
the appliance is going to work safely and with no
faults.
•
Prevent electric shock. Prevent body contact with
grounded items, e.g. water piping, heating elements,
cookers and fridges.
•
Approved parts to be used only. Identical spare
parts to be used only for servicing and repairs. For that
purpose, contact the authorised customer service
centre.
•
Warning! Any use of accessories and extensions not
explicitly recommended in these Operating Instructions
can put persons and items at risk.
•
Make sure your body posture is stable
Avoid any abnormal body posture. Ensure safe
posture and keep balance at all times.
•
Do not leave adjusting keys in the appliance
Make sure you have removed all the adjusting keys
and tools from the appliance before putting it into
operation.
Appliance-specific safety instructions
•
Wearing personal protective equipment is absolutely
necessary for all works with the appliance.
•
To prevent eye injury, protective glasses should
always be worn.
•
Check whether the guards are fitted properly before you
start working.
•
Do not overload the appliance. Working in the specified
power range is better and safer.
•
Cables should always be laid away from the appliance.
Protect the cables against excess temperatures, oil and
sharp edges.
•
Unplug the appliance when executing repairs, providing
servicing and when the appliance is not used.
•
Works on electrical installation can only be executed by
electricians. Spare parts to be used only.
•
Clean place of work makes working easier.
•
Pay attention to what you are doing. Use common sense
when working.
•
Do not use the appliance near flammable liquids and
gases.
•
Use the appliance only in an appropriate environment and
do not expose it to wet and moisture.
•
Always ensure appropriate lighting for your work.
•
Do not use the cable for unplugging the appliance.
•
Sharp and clean tools should always be used.
•
Switch the appliance immediately off and unplug it in
dangerous situations or when experiencing technical
difficulties.
•
You must not continue in working if the appliance is
damaged. The machine must be unplugged and damage
removed before putting it into operation again.
•
Tools and accessories approved by the
manufacturer can be used only. Using any
disapproved parts poses a great risk of injury.
•
Aerating on slopes should always take place from left to
the right, never up and down.
•
Never change the working height, i.e. height of wheels
when the engine is running.
Electrical safety
•
The appliance has been designed to be used with an
alternating current source only. Never try to use the
appliance with any other current source.
•
The appliance has double insulation. All outer metal parts
are therefore electrically insulated from the current source.
Double insulation represents higher electrical safety;
appliance grounding is therefore not necessary.
There might be short voltage failures in less powerful
electrical networks when the appliance is started. This may
influence the working of other appliances, e.g. brightness
fluctuation of the lighting system. Such influences need not be
experienced if the network impedance is Zmax < 0.997 Ω (more
information can be obtained from your local electrical energy
supplier if necessary).
Behaviour in case of emergency
First aid kit must always be available in the place of your work
in case of accident in accordance with DIN 13164. Material
taken out of the first aid kit needs to be supplemented right
away.
If help is needed, please provide the following details:
Place of accident
Accident nature
Number of injured persons
Injury type
Provide necessary first aid treatment corresponding to the injury
nature and seek qualified medical help as soon as possible.
Protect the injured person from other injuries and calm him/her
down.
10
Publicité
