Eu Declaration Of Conformity - Güde GV 1100 P Mode D'emploi Original

Revolutions
Working width
Working height
Appliance description (pic. 1/2)
1. Switch lever
2. Safety button
3. Electric connection
4. Upper connecting post
5. Bottom connecting post
6. Engine housing
7. Wheels
8. Collection container (GV 1400 P only)
9. Working height adjusting wheel (GV 1400 P only)
Supply includes
1 verticutter
1 bottom connecting post (consisting of 2 parts at GV
1100P)
1 upper connecting post
1 set of screws and accessories (cable clamps,
hand wheels, cable pull relief)
1 Operating Instructions and certificate of warranty
1 collection container (GV 1400 P only)
1 collection container frame (GV 1400 P only)
1 hook for operation without collection container
(GV 1400 P only)

EU DECLARATION OF CONFORMITY

We,
Güde GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Germany,
herewith declare that the following appliance complies with
the appropriate basic safety and healthy requirements of
the EU Directives based on its design and type, as brought
into circulation by us.
In case of alternation of the machine, not agreed
upon by us, this declaration will lose its validity.
Machine description:
GV 1100 P ELECTRIC VERTICUTTER
GV 1400 P ELECTRIC VERTICUTTER
Article No.
#06004
#06006
Applicable EU Directives:
2006/42/EG
2004/108/EG
2000/14/EG
Collection container
capacity
Weight
Noise
9
Applicable harmonised standards:
EN 60335-1:2002+A1+A11+A12+A2+A13
EN 60335-2-92:2005
EN 62233:2008
EN 55014-1:2006
EN 55014-2:1997+A1
EN 61000-3-2:2006
EN 61000-3-11:2000
Date/authorised signature:
Title of signatory:
Technical documentation:
Warranty
The warranty applies exclusively to material defects or
manufacturing defects. Original purchase voucher with the
purchase date must be provided for lodging a claim in the
warranty period.
The warranty does not cover any unauthorised use such as
appliance overload, violent use, damage by a foreign person or
foreign item. Failure to follow the Operating Instructions or
assembly instructions and ordinary wear and tear are also
excluded from the warranty.
GV 1100 P #06004 technical specifications
Connection 230V~50Hz
Engine power 1,100 W
Engine speed 2,800 per min
Working width 270 mm
Working height -6.5/-1/5 (in mm)
Knives 10
Noise: L 92 dB
WA
Weight: 14 kg
Dimensions 1,060 x 445 x 990 (LxWxH in mm)
GV 1400 P #06006 technical specifications
Connection 230V~50Hz
Engine power 1,400 W
Engine speed 2,800 per min
Protection type IPX4
Working width 303 mm
Working height -6.5/-4.5/-1/3/8/13 (in mm)
Container capacity 40 l
Noise: L 87 dB
WA
Weight: 18 kg
Dimensions 1,080 x 460 x 1,030 (LxWxH in mm)
General safety instructions
The appliance meets EN 61000-3-11 requirements and is
subject to special connection conditions. This means that
using the appliance on any connection points is not
allowed. Under unfavourable network conditions, there
may be temporary voltage spikes. The appliance has
exclusively been designed to be used on connection points
not exceeding the maximum allowed network impedance of
Zmax = 0.233 Ω.
As the user, you must make sure, after an arrangement
with your supplier, if necessary, that your connection point
on which you want to operate your appliance meets the
requirement mentioned above.
The Operating Instructions must be read
thoroughly before using the appliance. If there are
any doubts regarding the appliance connection
and operation, please contact the manufacturer
(customer service centre).
29 Oct, 2010
Managing Director, Mr Arnold
J. Bürkle FBL; QS
-1
-1