EUROM Fireball 20T Manuel D'utilisation page 31

Contents
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . 32
Description . . . . . . . . . . . . .
Technical data . . . . . . . . . . . . . . . . . . . . . .
Unpack and Assembly. . . . . . . . . . . . . . . . . . . . . . . . . 36
Fuel . . . . . . . . . . . . . . . . . . . . . . . .
Working principle . . . . . . . . . . . . . . . . . . . . . . . . . 37
Instructions for use . . . . . . . . . . . . . . . .
Long-term storage . . . . . . . . . . . . . . . . . . . . . . . . . 40
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Problems and solutions . . . . . . . . . . . . . . . . . . . . . . 43
Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
CE-declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Important: Read and follow these instructions carefully before assembling the heater
and using it. Failing to follow the safety instructions could lead to serious personal
injury or even death and/or damage being caused to the heater. When using the
heater, basic safety measures must always be taken in order to prevent the risk of
fire, electrical shock, explosion, burns, carbon monoxide poisoning, choking,
personal injury and/or the heater becoming damaged. Follow all local regulations and
codes when using the heater.
Keep all instructions in a safe place so that they can be consulted in the future.
This device is a petrol/diesel hot air canon with direct combustion and a forced air
supply. It is intended to be used for temporary heating of areas such as buildings
under construction or renovation, etc.
Direct heating means that all of the combustion products end up in the space to be
heated. Even though combustion is more or less complete, a small quantity of toxic
carbon monoxide can be produced, see 'Safety instructions'.
A forced air supply means that a fan 'pushes' the air through the heater. Good
combustion depends on air flow. With this in mind, changes must never be made to
the device, parts must not be removed and safeguards must not be put out of action.
The user of the device is responsible for ensuring that all present are aware of the
safety instructions.
EN
. . . . . . . . . . . . . . 35
. . . . . . . . . 37
. . . . . . . . . 38
31
. . . . 36