EUROM Fireball 20T Manuel D'utilisation page 41

Générateurs d'air chaud - fioul ou kérosène
Masquer les pouces Voir aussi pour Fireball 20T:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fuel and fuel tank
Rinse the tank after every 200 hours of operation or more frequently if necessary. Do
not use water to clean the tank; only use top quality, fresh paraffin.
Filters
Air intake filter: After a maximum
of 500 operational hours, wash in a
mild,
soapy
solution
and
dry
thoroughly or replace. Do so more
often if used in dusty environments!
Air intake filter/lint filter: Replace
after a maximum of 500 operational
hours or once a year if used in a
dusty environment.
NB:
when
using
diesel,
extra
maintenance may be required
Fan blades
Clean at least once a season or whenever
necessary. Clean the fan with a soft cloth,
slightly moistened with a gentle soapy solution.
Be careful not to move the blades out of position
and check that they are rotating correctly after
restarting the heater.
Nozzle
Clean the nozzle as often as required, but at least once per season. Contaminated
fuel may mean the nozzle will have to be cleaned immediately. In order to remove
dirt, use a compressor to blow air from the front of the nozzle. Soak in clean paraffin
in order to remove any stubborn dirt.
41

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fireball 37t

Table des Matières