Operating Instructions; Function Generator; Internal Parameter Configuration (Config) - Promax RP-110 Manuel D'utilisation

USER'S MANUAL. RP-110

4.2 Operating instructions

The RP-110 has the following operating modes:
1. FUNCTION CONFIG:
2. FUNCTION
GENERATOR:
Press the key SEL
Press the key UP or DOWN
4.2.1 Internal parameter configuration (
Press the key CONFIG
Press again the key CONFIG
Parameters are automatically stored.
Figure 3.- Internal Configuration Parameters (CONFIG).
The configuration menu has the following options:
a) LANGUAGE
This field allows you to select the language between Spanish, English, French
and German.
07-2011
It allows you to set several parameters of the
instrument, such as language, backlight, contrast, etc.
It sets the characteristics of the signals generated by the
instrument. It can active or deactive the signal in order to
check the trasmission channel. This function is selected
by default when starting.
[3] to move between parameters.
[4] to change a parameter.
CONFIG
[2] to access the configuration menu.
[2] to exit the configuration screen.
)
Page 9