USER'S MANUAL. RP-110
2 SAFETY RULES
2.1 General safety rules
*
Safety can not be assured if instructions are not closely followed.
*
The external DC chareger is a Class I equipment, for safety reasons plug it to a
supply line with the corresponding ground terminal.
Use the mains adapter in Overvoltage Category II and Pollution Degree 1
installations. To use INDOOR.
*
When using some of the following accessories use only the specified ones to
ensure safety:
Rechargeable battery
Mains adapter
Power cord.
*
Observe all specified ratings both of supply and measurement.
*
Use this instrument under the specified environmental conditions.
*
The user is not allowed to carry out the following maintenance operations:
Any change on the equipment must be carried out exclusively by technical staff.
*
Use proper cables with low radiation levels for signal input / output, specially when
working with high signal levels.
*
Follow the cleaning instructions described in the Maintenance paragraph.
07-2011
Page 3