Appendix; Converting The Carrier And Harness From Right Hip Mount To Left Hip Mount (Standard Carrier) - MSA PremAire Cadet Escape G1 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9

Appendix

9.1

Converting the Carrier and Harness from Right Hip Mount to Left Hip Mount (Standard Carrier)

NOTE: The PremAire Cadet Escape Respirator is designed for use with the cylinder located on the
right hip. The respirator will be most comfortable for most users in this configuration.
(1)
As necessary, disconnect the attachment hose from the air supply
hose.
(2)
Disconnect the strain relief strap from the shoulder strap snap
hook (strap with buckle).
(3)
Disconnect the cylinder carrier from the shoulder strap and pull
strap (strap without buckle).
(4)
Loosen the hose clamps.
(5)
Rotate the straps 180°.
The straps should be equally spaced on either side of the pres-
sure gauge.
(6)
Tighten the hose clamps.
(7)
Unweave the waist belt strap from the male waist belt buckle.
PremAire Cadet Escape G1
Appendix
US
32

Publicité

Table des Matières
loading

Table des Matières