Facepiece; Carrier And Harness Assembly - MSA PremAire Cadet Escape G1 Manuel D'utilisation

2.5

Facepiece

The G1 facepiece is available with different head harnesses; fabric (both Speed-ON and 5-point) or
rubber (5-point).
The G1 Facepieces is available with a push-to-connect regulator inlet connections.
The G1 Facepiece has a speaking diaphragm for clear, short-range communication.
THe G1 Facepiece includes a low-resistance, pressure-demand exhalation valve designed for easy
cleaning. An inhalation check valve in the inlet housing keeps moisture and contaminants out of the
mask mounted regulator.
The facepiece lens is super-hardcoated to meet the requirements of NFPA 1981.
The facepiece has a low-resistance, pressure-demand exhalation valve. An inhalation check valve in
the inlet housing keeps moisture and contaminants out of the regulator.
2.6

Carrier and Harness Assembly

The carrier and harness assembly consists of a cylinder carrier, a waist belt, a shoulder strap, and
attachment hose strain relief strap.
The carrier and harness assembly is available in nylon or Kevlar materials.
The cylinder carrier is available in standard and bag versions. The standard version includes metal
clamps and fabric straps. The bag version includes a single bag with draw string. Cylinder carriers are
removable from the harness using quick release hardware.
The waist belt is available in two sizes, standard and large. The waist belt includes a side-release
buckle with single adjustment. The shoulder strap includes a large adjustment buckle.
A shoulder pad accessory is available.
The harness assembly includes a stand-by mount to stow the second stage regulator when the respi-
rator is not in use.
PremAire Cadet Escape G1
Description
US
8