Manual drive stacker EHH PS
English
2.3 Safety Instructions
Never leave the load unattended in a raised position.
Transporting of persons and a presence within the danger zone is not permitted.
A presence under a raised load is not permitted.
The specified load capacity must not be exceeded.
Operation is only permitted on a level and firm floor/ground surface.
The loaded material must be distributed evenly on the fork.
The hydraulic stacker must never be loaded whilst the fork is in a raised position.
Never reach into moving parts.
Check safety functions before and during operation (brake, safety button, lowering
brake valve, emergency stop / key switch)
In case of occurring faults immediately stop operation.
Not suitable for use in potentially explosive environments.
Not suitable for use in corrosive environments.
Without additional safeguards, the manual pedestrian stackers not suitable for cold store operation and
must not come into direct contact with food.
Alterations to the Stacker or fitting of accessories are only allowed with our written approval.
Driving on public roads is not allowed.
The high-lift pallet truck is not made for or capable of off-loading lake a fork lift truck or crane.
Defects are to be dealt with competently as soon as they become apparent.
2.4 Operating Personnel
Operation, installation and maintenance work should only be executed by:
Competent, qualified persons
(definition of experts acc. to IEC 364) Qualified persons for reasons of their training, experience and
instruction are persons who do their necessary activities without danger and who can avoid this danger due
to their knowledge of directives, regulations for the prevention of accidents and standards. These persons
are responsible for the security of the installation.
The manual drive stacker should only be operated by competent personnel aged 18 years and over, who
are sufficiently trained and authorised to operate the stacker.
2.5 Examination
According to BGV D 27 § 20 the Electric Pedestrian Stacker has to be examined if required, but
at least once a year by a competent person.
We recommend you to register the results in a test book.
2.6 Transport
Two harness positions on the frame are provided to transport the truck.
2.7 Taking into Operation
Before taking into operation it is absolutely essential to carefully study this operating instructions as well as
the valid Regulation for the Prevention of Accidents.
Ensure that the battery is fully charged and connected.
Only operate the truck with battery power! Never use rectified AC current as this will damage the electrical
components.
Check the gear- and hydraulic oil level.
Check safety functions, e.g.:
Main switch
over pressure valve
Make a test run.
Technische Änderungen vorbehalten
Design changes under reserve
F 08.01.154
Sous réserve de modifications techniques !
15