Destined Use; Regulations For The Prevention Of Accidents - Pfaff EHH PS Traduction Du Manuel D'utilisation Original

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Manual drive stacker EHH PS
English
1
General
Before taking into operation, please carefully read this operating instructions
and the BGV D27 regulations for prevention of accidents.
Observe the safety instruction!
File documentation!
This Operating- and Maintenance Instruction should be accessible to all persons involved
with the operation, maintenance and service of the Electric Pedestrian Stacker and should
be regarded during their activities.
1.1 Introduction
With this manual we present to you your new Electric pedestrian stacker.
Model
EHH PS 1009
EHH PS 1016
EHH PS 1020
Prior to initial operation, we recommend you to carefully study the following Operating and Maintenance in-
structions and to consider our suggestions. This will help you to save time and costs. Appropriate handling
will also guarantee permanent serviceability and long working life.
The name plate fixed to the stacker giving type and Test no. (serial number) is required for exact identifica-
tion of the stacker. Therefore, you are requested to advise the Test no., type number and year of manufac-
ture in case of questions or spare part orders.
Battery and Battery charger are to be ordered separately.
1.2 Trial and Practice Runs
Before using the Manual drive stacker, we recommend you to make trial and practice runs. By practising,
you will learn sensitive handling of the stacker.
1.3 Readiness for Duty - Spare Parts
In order to avoid failure, even small damages should be repaired immediately by a competent person.
Only use original spare parts as per the enclosed spare parts list, otherwise safe function is not guaranteed.
2
Prevention of Accidents

2.1 Destined use

The manual drive stacker is a high lift fork truck for electric lifting, lowering and manual moving of loads. It is
a travelling floor conveyor with the short name EHH PS.
The manual drive stacker is a wheel arm stacker with forks situated above the fixed roller arms.
This enables to move under pallets without support situated crosswise to the drive direction (wheel
opening) .
The manual drive stacker is suited as a unit load carrying device in works traffic, for example in warehouse
storage, forwarding agencies, etc. and for transportation in the close range of standardised pallets, box
pallets and other palletised loads.
The operation requires even and fixed travel surface.

2.2 Regulations for the Prevention of Accidents

The Electric Pedestrian Stacker must be operated and used acc. to the current rules and regulations.
Observe any rules which are valid for the respective country
Presently valid in Germany:
EC directive 2006/42/EC
German UVV safety standard BGV D 27
EC Directive DIN EN 1757-1; EN 1726-1; EN 1175-1;
EN 50081-1; EN 50082-2; EN 61000-4-2
1)
in the respective version
technische Änderungen vorbehalten
Ref. No.
040046051
040044422
040044423
design changes under reserve
F 08.01.154
Model
EHH PS 1225
EHH PS 1229
EHH PS 1235
1)
.
changements techniques sous réserve
Art. No.
040044424
040044425
040044426
14

Publicité

Table des Matières
loading

Table des Matières