Control
512 USITT, with built-in Wireless DMX receiver
Master / Slave functionalities to manage
several projectors without DMX lighting Desk
17 / 24 / 49 DMX channels required to control all parameters
of the projector
Selectable DMX Modes
Software facilities
Fixture settings for DMX address and functions
DMX-RDM Ready
On/off LCD display
8/16 bit movement resolution selection
Pan & tilt inversion facility
Sophisticated control of cooling parameters to reduce noise
Selectable Ventilation User's Modes
Pre-set sequence control
Software upgrade via DMX
Hardware facilities
Graphic LCD display for addressing and special functions
setting read out with flip function
5 menu buttons for setting the functions
Over temperature protection
Control by DMX 512 standard signal
via 3 pin & 5 pin XLR or Wireless DMX
Pan and Tilt Lock system to ease-up
transportation
Power supply
Any AC Voltage power supply between 110 to 240 Volts
(50/60 Hz)
Electronic Power Supply with active PFC (Power Factor
Correction)
Cooling system
Advanced ventilation cooling system
Self adjusting variable speed fans for quiet operation (Fan
Auto Mode)
Selectable Ventilation User's Modes
Housing
Construction: Self-extinguishing V0 class fire-retardant
ABS PC moulded covers. Moving head skeleton made of
Aluminium and Steel metal plates
Two sides handles for transportation
IP20 protection rating
Exterior finish: Carbon (Black)
Rigging
Fastening Brackets System: Two Omega
¼ turn brackets designed for use with
standard connection systems
Mounting points: Four ¼ turn locking fittings, allowing 4
different installation of ¼ turn brackets
Safety cable attachment point
Operating parameters
Working position: Any
Maximum ambient temperature (Ta): 45°C
Conformity
EU (EMC) : EN 50081-1, EN 50082-1
EU (Electrical Safety) : EN 60598-1,
EN 60598-2-17
Size
446 x 544 x 305 mm (l x h x d)
Weight
22,8 Kg
n 330
USER MANUAL
19
107
446
371
200
305