Users Mode Set; Edit Program; Select Program - Ayrton WildSun 500 Mode D'emploi

dimmer intensity will be set to 100 %.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Effect Adjust" is displayed.
Press ENTER, the display will show "Effect Adjust".
2. Press <Up/Down>, the display will show "Manual
control".
3. Press <ENTER>, the display will show "Manual control".
4. The display show "PAN=XXX".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Calibrate values
With this function, you can calibrate and adjust the effect
wheels to their correct positions. The password of calibrate
values is 050.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Effect Adjust" is displayed.
Press ENTER, the display will show "Effect Adjust".
2. Press <Up/Down>, the display will show "Calibrate
values".
3. Press <ENTER>, the display will show "Calibrate values".
4. The display show "Password=XXXX".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Users mode set

In this menu, user can select different channels list by different
sequence:
For example, after the user enter this manual, if select Auto
Program = CH 22, means in this User's mode, the "Dimmer"
is in Channel 16.
User mode
With this function, you can create user defined channel
orders.
Preset User mode
With this function, you can adjust the rest user defined
channel order.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Users mode set" is displayed.
Press ENTER, the display will show "Users mode set".
2. The display show "User Mode" first channel, Press <Up/
Down> the display will show "Edit User Mode".
3. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Edit program

Select program

With this function, you can select the program for the Program
Run.
Edit program
With this function, you can edit the internal programs.
Edit scenes
With this function, you can edit the scenes of the internal
programs.
Rec. Controller
The moving head features an integrated DMX-recorder by
which you can transmit the programmed scenes from your
DMX-controller to the moving head. Adjust the desired
scene numbers via the encoder (from – to). When you call
up the scenes at your controller, they will automatically be
transmitted to the moving head.
Excursion
A Master unit can send up to 3 different data groups to the
Slave units, i.e. a Master unit can start 3 different Slave units,
which run 3 different programs. The Master unit sends the 3
program parts in a continuous loop.
Auto Pro Auto Pro Auto Pro Auto Pro
Part 1 Part 2 Part 3 Part 1
The Slave unit receives data from the Master unit according
to the group which the Slave unit was assigned to. If e.g. a
Slave unit is set to "Slave 1" in the menu "Set to Slave", the
Master unit sends "Auto Program Part 1" to the Slave unit. If
set to "Slave 2", the Slave unit receives "Auto Program Part
2".
To start a Auto Program please proceed as follows:
1. Slave-Setting
Select "Function Mode" by turning the encoder.
Press the Enter button to confirm.
Select "Set to slave" by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select "Slave 1", "Slave 2" or
"Slave 3".
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
2. Automatic Program Run
Select "Function Mode" by turning the encoder.
Press the Enter button to confirm.
Select "Auto Program" by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select "Master" or "Alone". The
selection «Alone» means Stand Alone-mode and «Master»
that the device is defined as master.
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
14 USER MANUAL
Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro
Part 2 Part 3 Part 1 Part 2 Part 3