Personality - Ayrton WildSun 500 Mode D'emploi

1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Information" is displayed.
Press ENTER, the display will show "Information".
2. Press <Up/Down>, the display will show "Software
version".
3. Press <ENTER>, the display will show "Software version".
4. The display show "Ver 1.0......".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Personality

Status setting
Address via DMX
With this function, you can adjust the desired DMX-address
via an external controller.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap the
<Up/Down> button until the display will show "Status
setting". Press ENTER, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Address via
DMX".
3. Press <ENTER>, the display will show "Address via
DMX".
4. The display show "ON", Press <Up/Down>, the display
will show "OFF".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
No DMX Status
With this function, when the drive is not DMX signal, it runs
automatism, close, hold and music, the default is hold.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down button until "Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Status setting".
Press <ENTER>, the display will show "Status setting".
2. Press <Up/Down>, the display will show "No DMX
Status".
3. Press <ENTER>, the display will show "No DMX Status".
4. The display show "Hold", Press <Up/Down>, the display
will show "Close", "Auto", "Music".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Pan Reverse
With this function you can reverse the Pan-movement.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap
the <Up/Down> button until the display will show "Status
setting". Press <ENTER>, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Pan Reverse".
3. Press <ENTER>, the display will show "Pan Reverse".
4. The display show "OFF", Press <Up/Down>, the display
will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Tilt Reverse
With this function you can reverse the Tilt-movement.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap
the <Up/Down> button until the display will show "Status
setting". Press <ENTER>, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Tilt Reverse".
3. Press <ENTER>, the display will show "Tilt Reverse".
4. The display show "OFF", Press <Up/Down>, the display
will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Pan Degree
With this function, you can select pan degree for 630 or 540.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap the
<Up/Down> button until the display will show "Status
setting". Press ENTER, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Pan Degree".
3. Press <ENTER>, the display will show "Pan Degree".
4. The display show "540", Press <Up/Down>, the display
will show "630".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Feedback
With this function, you can feedback switch of pan movement
or tilt movement.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap the
<Up/Down> button until the display will show "Status
setting". Press ENTER, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Feedback".
3. Press <ENTER>, the display will show "Feedback".
4. The display show "ON", Press <Up/Down>, the display
will show "OFF".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
USER MANUAL 11