Ayrton WildSun 500 Mode D'emploi page 15

3. Program selection for Auto Pro Part
Select "Edit program" by turning the encoder.
Press the Enter button to confirm.
Select "Select programs" by turning the encoder.
Press the Enter button to confirm.
Turn the encoder to select "Auto Pro Part 1", "Auto Pro
Part 2" or "Auto Pro Part 3", and thus select which Slave
program is to be sent. Selection "Part 1" means, that the
Slave unit runs the same program as the master units.
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
4. Program selection for Edit Program
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Select "Edit program" by turning the encoder.
• Press the Enter button to confirm.
• Turn the encoder to select the desired program. With
this function you can edit specific scenes into a specific
program.
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the
main menu.
5. Automatic Scene Recording
Select "Edit program" by turning the encoder.
Press the Enter button to confirm.
Select "Edit scenes" by turning the encoder.
Turn the encoder to select the desired scene numbers.
You can program a maximum number of 250 • Turn the
encoder to select the desired scene numbers. You can
program a maximum number of 250 scenes.
Press the Enter button to confirm.
Press the MODE/ESC button in order to return to the main
menu.
Example:
Program 2 includes scenes: 10, 11, 12, 13
Program 4 includes scenes: 8, 9, 10
Program 6 includes scenes: 12, 13, 14, 15
Auto Pro Part 1 is Program 2
Auto Pro Part 2 is Program 3
Auto Pro Part 3 is Program 6
The 3 Slave groups run the Auto Program in certain time
segments, as shown in the following picture:
Part 1:
Part 2:
Part 3:
USER MANUAL 15
Scene 10 Scene 11
Scene 8S cene 9S
Scene 12 Scene 13
Scene 12 Scene 13
cene 10 Scene 8
Scene 14 Scene 15