Display Settings - Ayrton WildSun 500 Mode D'emploi

Movement Speed
With this function, you can select scan mode from 1 to 4.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap the
<Up/Down> button until the display will show "Status
setting". Press ENTER, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Movement
Speed".
3. Press <ENTER>, the display will show "Movement
Speed".
4. The display show "Speed 1", Press <Up/Down>, the
display will show "Speed 2", "Speed 3", "Speed 4".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Zoom Speed
With this function, you can select Zoom Speed between
"Speed 1" and "Speed 2". "Speed 2" is the faster setting.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality". Tap the
<Up/Down> button until the display will show "Status
setting". Press ENTER, the display will show "Status
setting".
2. Press <Up/Down>, the display will show "Zoom Speed".
3. Press <ENTER>, the display will show "Zoom Speed".
4. The display show "Speed 1", Press <Up/Down>, the
display will show "Speed 2".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Mic Sensitivity
With this function, the default is 70%, you can select the
desired microphone sensitivity from 0 % to 99 %.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Status setting".
Press ENTER, the display will show "Status setting".
2. Press <Up/Down>, the display will show "Mic Sensitivity".
3. Press <ENTER>, the display will show "Mic Sensitivity".
4. The display show "70%", Press <Up/Down>, the display
will show "0~99%".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Hibernation - Standby mode
The step motors will be power off if the fixture stay without
DMX signal for 15 mins (Factory default). And the fixture will
be reset before working once it receive DMX signal again.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Status setting".
Press ENTER, the display will show "Status setting".
2. Press <Up/Down>, the display will show "Hibernation".
3. Press <ENTER>, the display will show "Hibernation".
4. The display show "15M", Press <Up/Down>, the display
will show "01M", "02M" .... "99M" or"OFF".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Fans Control
Head Control
With this function, you can set the speed of the running head
fans. The selections have Auto, high and low.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Fans Control".
Press ENTER, the display will show "Fans Control".
2. Press <Up/Down>, the display will show "Head Control".
3. Press <ENTER>, the display will show "Head Control".
4. The display show "Auto Fans Speed", Press <Up/
Down>, the display will show "High Fans Speed", "Low
Fans Speed".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Base Control
With this function, you can set the speed of the running base
fans. The selections have 10%, 30% and 50%.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed. Press
ENTER, the display will show "Personality". Tap the <Up/
Down> button until the display will show "Fans Control".
Press ENTER, the display will show "Fans Control".
2. Press <Up/Down>, the display will show "Base Control".
3. Press <ENTER>, the display will show "Base Control".
4. The display show "30%", Press <Up/Down>, the display
will show "10%", "50%".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Display settings

Shut off time
With this function you can shut off the color LCD display
after 2 to 59 minutes. Turn the encoder in order to select the
desired shut off time. The default is 5 minute.
Display Reverse
With this function you can the entire display to be flipped by
180˚ to allow for better view when the fixture is hung from
truss or a ceiling. This function is disabled as default.
12 USER MANUAL