Reset-Functions; Effect Adjust; Manual Control - Ayrton WildSun 500 Mode D'emploi

Key Lock
With this function you can activate the automatic keylock
status. If this function is activated, the keys will be locked
automatically after exiting the edit mode for 15 seconds.
keeping press the [MENU] key for 3seconds if you do not
need this function.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Display
Setting".
3. Press <ENTER>, the display will show "Display Setting".
4. The display show "Shutoff Time", Press <Up/Down>,
the display will show "Display Reverse", "Key Lock".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Temperature C/F
With this function, Display the temperature for Celsius or
Fahrenheit.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Temperature
C/F".
3. Press< ENTER>, the display will show "Temperature
C/F".
4. The display show "Fahrenheit", Press <Up/Down>, the
display will show "Celsius".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Initial effect
With this function, Display initial effect position.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Initial effect".
3. Press <ENTER>, the display will show "Initial effect".
4. The display show "XXX".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Wireless DMX
From factory, this Led Moving Head is prepared for wireless
data transmission (W-DMX). If you wish to de-activate W-DMX
control, you can select the function "De-activate WDMX" by
turning the encoder. With the function "rest", you can log out
the Led Moving Head from the wireless sender.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Wireless
DMX".
3. Press <ENTER>, the display will show "Wireless DMX".
The display show "Activate WDMX", Press <Up/Down>,
the display will show "De-Act WDMX", "Activate WDMX", "
Act & Data Out", "Rest WDMX Mem".
4. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.
Restore Default
With this function, you can select restore factory set for ON
or OFF, the default is OFF.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Personality" is displayed.
Press ENTER, the display will show "Personality".
2. Press <Up/Down>, the display will show "Restore
Default".
3. Press <ENTER>, the display will show "Restore Default".
4. The display show "OFF", Press <Up/Down>, the display
will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Reset-functions

With this function you can reset the device via the Control
Board. You can select the different reset functions by turning
the encoder.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Reset-functions" is displayed.
Press ENTER, the display will show "Reset-functions".
2. The display show "Reset All", Press <Up/Down>, the
display will show "Reset All", "Reset Pan/Tilt", "Reset
ZOOM".
3. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Effect Adjust

Test channel
With this function you can test each channel on its (correct)
function.
1. Tap <MODE/ESC> button, access the main menu, Tap
the <Up/Down> button until "Effect Adjust" is displayed.
Press ENTER, the display will show "Effect Adjust".
2. Press <Up/Down>, the display will show "Test Channel".
3. Press <ENTER>, the display will show "Test Channel".
4. The display show "Pan Moving" first channel, Press
<Up/Down>, can choose other channel.
5. Press <ENTER> to confirm or press <MODE/ESC> to
return to the main menu.

Manual control

With this function, you can control the light sources more
easily. All effects will be canceled, the shutter opens and the
USER MANUAL 13